- Home / DC power modules /
- DCP405 features
- Power input: 48 Vdc (e.g. Mean Well LRS-150F-48)
- Max. output power: 200 W (limited to 155 W due to Mean Well AC/DC module)
- Voltage regulation (CV), 0 – 40 V
Voltage set and read resolution: 5 mV - Current regulation (CC) with 2-range (50 mA, 5 A)
Low range current set and read resolution: 5 uA
High range current set and read resolution: 0.5 mA - On-board power pre-regulator and bias power supply
- On-board OVP with triac/MOSFET crowbar and two fuses
- Down-programmer
- Output enable (OE) circuit with LED indicator combined with coupling indication
- On-board Ø4 mm safety sockets (19 mm/0.75” pitch)
- 20-pin pass-thru connector for output terminals coupling with other Power boards
- Remote voltage sense with LED indicator and inverse polarity protection
- Remote voltage programming with LED indicator
- Galvanically isolated SPI bus for communication with the MCU board
- I2C EEPROM for storing board specific configuration and calibration parameters
- I2C Temperature sensor
- Dimensions: 185 x 95 mm, 4-layer PCB
